The Best Way To Configure A Local Storage Device For Backup With The Base Station
All data registered by Arlo is
collected on the cloud so that anyone can download the security data whenever
necessary. And the copy of your secured data can be saved locally using a USB
storage device with the Arlo Pro base station. If you are willing to have a
local backup of all your security data, then you should install the USB storage
device with the Arlo Pro base station. With this, you will have to follow the Arlo Base Station Setup
process. So get the relevant information you should read this post. With this,
you can make a connection with the Netgear accredited executives.
Whenever the local USB storage the device runs out of space, the Arlo pro app can be used to get information.
Whenever all storage space is full, users can auto-load the local USB storage
drive. Whenever the available storage space is below 20%, the auto overwrites
command will start deleting previously recorded files. Exclusively files
accessible in the Arlo folder are removed, and other folders are not removed
due to auto overwrite.
Hardware
Requirements:
● Arlo
Base station for Arlo Pro security camera
● A
USB storage drive with the least storage space of a hundred to two hundred MB.
If the fingers are located in the vicinity of a huge traffic area, it can often
trigger & record many videos during a day. In this type of situation, you
may need a USB device with a huge storage space. If you cannot make a very large
USB drive you can choose the auto-overwrite alternative.
Follow
the required steps to configure or set up the local USB storage
● First
of all, you should connect the USB storage drive along with the two available
USB ports which you see just behind the Arlo base station of Arlo pro security
camera.
● After
that, you should open the Arlo Pro application and log in to the Arlo account.
● Then,
you need to write in the login credentials and tap on the log in icon.
● After
that, you notice the corresponding account will open & you will reach on
the home page.
● Then
you should locate the option for the menu on the home page of the Arlo security
camera app & tap on it.
● You
will get an option inside the settings. Then you should click on it.
● Also,
you need to tap on the “My device” option.
● Choose
the Arlo base station to which you want to add a local external USB storage
device.
● Now,
you need to tap on the “local storage”.
● After
that, you should verify whether there is green light available just in front of
the name of the added USB storage drive. If you notice the green light in front
of the USB drive, that time it will indicate your drive is ready to use. With
this, you will have to remember, that if ever you need to assign a name to
the USB drive then you will notice the corresponding name will present.
● If
you are willing to delete and format all the files which are already saved on
the USB drive.
Comments
Post a Comment